Verdigris Wax

HOW TO USE

Preparation

Ensure the surface is clean, dry and free from any previous finishes.

Application

Work a small amount into mouldings, or where required, using a brush or cloth. Allow to dry for two to three minutes before removing as much or as little of the excess as you wish with a clean lint-free cloth or Ultra Fine Steel Wool (Grade 0000).

To use the wax as a coloured finish on bare wood, work a thin coat into the wood with Ultra Fine Steel Wool (Grade 0000), allow to dry and buff. The wax may be thinned with a small amount of white spirit to make application on bare timber easier.

Once dry seal the wax with White Polish. To remove large areas of Special Effect Wax use Black Bison Wax Neutral or Finishing Oil on a lint-free cloth or steel wool.

Important

Always test the product on a spare surface or inconspicuous area for colour, compatibility and end result.

UNIT SIZE:

250ml

COVERAGE:

8-12m²

LOCATION:

Interior

DRYING TIME:

Minimum 5 minutes

APPLICATION:

Steel Wool

TOOL CLEANING:

White Spirit