Skip to product information
1 of 1

Liberon NZ

Floor Sealer

Floor Sealer

Regular price $88.00 NZD
Regular price Sale price $88.00 NZD
Sale Sold out
Tax included.
Size

Purpose 


Liberon Floor Sealer is a natural, oil based finish for wood and parquet floors. It enhances the natural colour of new and old wood and is water, heat and alcohol resistant. Floor Sealer can be used alone to achieve a final satin to gloss finish, or as a sealer prior to waxing or varnishing with Liberon's range of floor finishing products. It is also suitable for sealing unvarnished cork surfaces. 

Performance 
Oil based sealer for wood and parquet flooring Enhances the natural colour of new and old wood Seals floors prior to waxing and varnishing Helps protect against stains and scratching EN71 Part 3 Approved - safe for toys Endorsed by the Guild of Master Craftsmen Usage: Interior 


How to use 
Preparation 
Sand the floor if required and remove all previous finishes. Ensure the surface is clean, dry and dust free. If you wish to colour the wood use Liberon Wood Floor Dye prior to applying Floor Sealer. 

Application 
Shake the container well before use. Apply a reasonable coat of Floor Sealer with a brush, roller or cloth. Allow the oil to penetrate for 5 to 10 minutes then remove the excess with a dry lint-free cloth. We recommend a minimum of 3 coats allowing 5 hours between coats. Additional coats may be required on porous surfaces or to achieve a higher finish. Liberon Floor Wax or High Resistance Varnish may be applied after sealing, please allow 24 hours for the last coat of Floor Sealer to harden before applying. 

Cleaning and maintenance 
Surfaces should be swept or vacuumed and may be cleaned with a damp cloth. Any spills should be wiped up immediately. For stubborn stains a mild detergent can be used, alternatively lightly sand the affected area to remove the stain and then re-apply Floor Sealer. When using Floor Sealer alone surfaces may need to be re-sealed once a year, or more frequently in areas of high foot traffic. 

Precautions 
Allow all wood dyes to dry for a minimum of 8 hours before applying Floor Sealer. Do not use on vinyl or similar floor coverings. This product may dissolve bitumen-based adhesives. Oily cloths may self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard. 


Coverage 
1 L = 10 - 12m² 

Pack Size 
1L, 5L and 25L 

Drying Time 
Minimum 5 hours 

Tool Cleaning: White Spirit 
Application: Brush - cloth

View full details