Purpose
Liberon Rottenstone is a very fine abrasive for polishing French polish finishes.
Performance
Ideal for producing an aged dusty look on newly restored antiques, modern furniture and picture frames etc. Cuts back French polishes Can be used wet or dry
How to use
Application
Apply with a light oil such as liquid paraffin or linseed oil and a cotton or felt pad. Dip the pad into the oil and then into the Rottenstone. Using moderate pressure rub along the grain until the desired level of sheen is achieved. Wipe off excess with a cotton cloth then wipe over with a cloth dampened with white spirit to remove the oil film. Allow to dry before applying a wax. Liberon Ultra Fine Steel Wool (0000) may be used for preliminary cutting back.
For an aged effect on gilded surfaces lightly dust the surface using a pounce or soft brush and then blow or lightly brush off excess Rottenstone leaving the dust to lie in the recesses.
Important
Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. |
|
